You can add up to three stops during a single Uber trip through the app before you request the ride, or add them after you've started driving
Uber lets you include multiple destinations in one trip without ending the ride and requesting a new one. This works for errands, pickups, or any route where you need to stop more than once. The process differs slightly depending on whether you add stops before or after your driver has arrived.
Adding stops saves money compared to requesting separate rides, because you pay one trip fare instead of multiple. Your driver will navigate to each stop in the order you set them, and the app shows your driver the full route before they accept.
Key Takeaways
- You can add up to three stops total in a single Uber trip, meaning one pickup location plus three destinations.
- Add stops before requesting the ride by tapping the plus icon next to your destination, or add them after the ride starts by tapping the menu icon in the active trip screen.
- Your driver sees all stops before accepting the ride if you add them beforehand, but may decline if the route is too long or goes outside their service area.
- Stops are completed in the order you list them, and you cannot reorder them after the driver has started moving toward the first one.
- If your driver cancels after seeing multiple stops, you will be charged a cancellation fee, so confirm the route makes sense before requesting.
Adding stops before you request the ride
Open the Uber app and enter your pickup location. Tap the destination field and type in your first stop. Below that field, you will see a plus icon or "Add stop" button. Tap it to add a second destination. Repeat to add a third stop if needed. The app displays all three stops in order on the map.
Once you have entered all your stops, request the ride as normal. Your driver will see the full route, including all stops, before they accept. They can decline if the route is too long, goes outside their service area, or conflicts with their schedule. If they accept, you are charged one fare for the entire trip, not separate fares for each leg.
Adding stops after the ride has started
If you did not add stops before requesting, you can add them once your driver is on the way. Open the active trip screen in the Uber app. Tap the menu icon (three horizontal lines) at the top right. Select "Add stop" from the menu. Enter the address or search for the location, then confirm.
Your driver will see the new stop appear on their navigation and will be routed to it after your current destination. You cannot add stops once the driver has begun the final leg of the trip toward your last destination. If you try to add a stop very close to your arrival time, the app may not allow it.
Reordering or removing stops
Before the driver accepts the ride, you can edit your stops by tapping on them in the app and changing the address or removing them entirely. Once the driver has accepted and started moving, you cannot reorder the stops. The route is locked in the order you set it.
If you need to remove a stop after the driver has accepted, tap the menu icon on the active trip screen and select the stop you want to remove. Confirm the removal. You will not be charged for the removed stop, but you will still pay the full fare for the trip as originally quoted.
What happens at each stop
When you arrive at a stop, the driver will wait while you complete your errand. The app shows a timer counting how long you have been at the stop. Most drivers will wait for a reasonable amount of time — typically five to ten minutes — without charging extra. If you take significantly longer, your driver may cancel the trip, and you will be charged a cancellation fee.
Once you are back in the vehicle, tap "Continue" in the app to confirm you are ready to move to the next stop. The driver will then navigate to the next destination. If you forget to tap "Continue," the driver can prompt you through the app.
Stops and service area limits
Your stops must fall within Uber's service area for your city or region. If you add a stop outside the service boundary, the app will warn you before you request the ride. Some drivers may also decline a trip if one or more stops are at the edge of their service area or require them to drive through areas they do not normally serve.
Certain locations — like airports, hospitals, or restricted zones — may have rules about where Uber can pick up or drop off. If you add a stop at one of these locations, the app may flag it or ask you to confirm the address. Your driver will follow Uber's rules for that location, which may mean dropping you at a designated area rather than the exact address you entered.
Charges and fare calculation
When you add multiple stops, Uber calculates one fare based on the total distance and time for the entire trip. You do not pay per stop. The fare is shown before you request the ride, and it does not change if you add stops afterward — the new total is calculated and shown immediately.
If your driver cancels after accepting a trip with multiple stops, you will be charged a cancellation fee. The amount varies by city and time of day. If you cancel before the driver accepts, you are not charged. If you cancel after they accept, the cancellation fee applies.
Frequently Asked Questions
Can I add more than three stops?
No. Uber's app limits you to three stops per trip. If you need more stops, you will have to complete the first trip and request a new one. Some cities may have different limits, so check your app to confirm the maximum for your area.
What if my driver refuses to go to one of my stops?
Drivers can decline a trip before accepting it if they see multiple stops and do not want to take it. Once they have accepted, they are expected to complete all stops. If a driver refuses to go to a stop after accepting, contact Uber support through the app and report the issue. You may be refunded the portion of the fare for the skipped stop.
Do I have to pay extra if I take a long time at a stop?
No. Your fare is set when you request the ride and does not increase based on how long you spend at each stop. However, if you take an extremely long time, your driver may cancel the trip, and you will be charged a cancellation fee.
Can I change the order of my stops after the driver starts driving?
No. Once the driver accepts the trip and begins navigation, the stop order is locked. You can only remove stops, not reorder them. Plan your route carefully before requesting the ride.
What if I add a stop and the driver's route changes?
The driver's navigation will update automatically to include the new stop. If you add a stop that significantly extends the trip, the driver may see it as a major change and could cancel. The app will show you the updated route before the driver accepts any changes.