Press and hold the power button until you hear two beeps

To turn on noise cancelling on Anker Soundcore headphones, first make sure the headphones are powered on. Press and hold the power button (usually on the right ear cup) for about three seconds until you hear two beeps or see an LED indicator flash. This confirms the headphones are on.

Once the headphones are on, locate the noise cancelling button. On most Soundcore models, this is a separate button from the power button — often on the left ear cup or marked with a microphone icon. Press this button once to activate noise cancelling mode. You should hear a confirmation sound or see the LED change color, typically to blue or white.

If your model doesn't have a dedicated button, you may need to use the Soundcore app on your phone instead. Open the app, connect to your headphones via Bluetooth, and look for the noise cancelling toggle in the settings menu. Tap it to turn noise cancelling on.

Key Takeaways

  • Power on your Soundcore headphones by holding the power button for three seconds until you hear two beeps.
  • Press the dedicated noise cancelling button (usually on the left ear cup) to activate the feature.
  • If there is no physical button, use the Soundcore mobile app to toggle noise cancelling on through the settings menu.
  • You will hear an audio confirmation or see an LED indicator change when noise cancelling turns on.
  • Battery drain increases when noise cancelling is active, so turn it off when you do not need it to extend listening time.

Locating the noise cancelling button on your model

The placement of the noise cancelling button varies depending on which Soundcore model you own. On over-ear models like the Soundcore Space Q45, the button is typically on the left ear cup and may be labeled with an icon showing sound waves or a microphone. On smaller models like the Space A40 or A50, the button is often recessed slightly to prevent accidental presses.

If you cannot find a physical button, check the underside or back of the ear cup. Some newer Soundcore models use touch controls instead of buttons — in these cases, you tap or swipe a specific area of the ear cup to toggle noise cancelling. Your headphones' manual will show the exact location and gesture for your model.

Using the Soundcore app to control noise cancelling

The Soundcore app gives you more control over noise cancelling than the physical button alone. Download the app from the Apple App Store or Google Play Store, then open it and pair your headphones via Bluetooth if they are not already connected.

Once paired, tap the noise cancelling icon in the app's main screen. You will see options for different modes — typically "Noise Cancelling On," "Noise Cancelling Off," and "Transparency Mode" (which lets outside sound in). Select the mode you want. The app also lets you adjust how aggressive the noise cancelling is, which can help preserve battery life if you lower the setting.

Some Soundcore models offer additional features through the app, such as custom sound profiles or the ability to schedule when noise cancelling turns on automatically. Check your app's settings menu to see what options are available for your specific headphones.

What to do if noise cancelling is not working

If you press the noise cancelling button and hear no confirmation sound, first check that your headphones have enough battery. Noise cancelling requires significant power, and some Soundcore models disable the feature automatically when battery drops below 10 or 15 percent. Charge your headphones for at least 30 minutes and try again.

If the battery is adequate, restart your headphones by turning them off completely, waiting 10 seconds, and turning them back on. Then press the noise cancelling button again. If the problem persists, check the Soundcore app to see whether the feature is disabled there — sometimes the app setting overrides the physical button.

For persistent issues, reset your headphones to factory settings. The process varies by model, but usually involves holding the power button for 10 to 15 seconds until the LED flashes a specific color. Consult your manual or the Soundcore support website for your exact model's reset procedure.

How noise cancelling affects battery life

Turning on noise cancelling reduces your listening time noticeably. Most Soundcore models lose 30 to 50 percent of their battery life when noise cancelling is active, depending on the model and how aggressively the noise cancelling is set. A model that plays for 50 hours with noise cancelling off might only last 25 to 35 hours with it on.

If you need your headphones to last through a long day, consider turning noise cancelling off in quieter environments where you do not need it. Use Transparency Mode instead when you want to hear your surroundings without fully disabling noise cancelling — this uses less power than full noise cancelling.

Switching between noise cancelling modes

Most Soundcore headphones offer at least two modes: Noise Cancelling On and Noise Cancelling Off. Some models add a third option called Transparency Mode or Ambient Mode, which uses the microphones to let outside sound in while you listen to music. Each press of the noise cancelling button cycles through the available modes.

If your model has multiple modes, the app usually shows which mode is currently active. You can also customize which modes appear in the cycle — for example, you might want to skip Transparency Mode if you rarely use it. This setting is typically found in the app's noise cancelling preferences.

Frequently Asked Questions

Why is my noise cancelling button not doing anything?

Check that your headphones have at least 10 to 15 percent battery remaining — noise cancelling disables automatically at low battery levels. If battery is adequate, restart the headphones by powering them off and back on. If the button still does not work, the headphones may need a factory reset or the button itself may be damaged.

Can I use noise cancelling while the headphones are charging?

Yes, you can use noise cancelling while your Soundcore headphones are plugged in and charging. However, charging while using noise cancelling will slow down the charging speed because the headphones are drawing power for both features at once.

Does turning off noise cancelling save a lot of battery?

Yes — turning off noise cancelling typically extends battery life by 30 to 50 percent depending on your model. If you need your headphones to last as long as possible, disable noise cancelling in quieter environments where you do not need it.

What is Transparency Mode and how do I turn it on?

Transparency Mode uses the headphones' microphones to let outside sound in while you listen to music. It uses less battery than full noise cancelling. Press the noise cancelling button repeatedly to cycle through modes, or use the app to select Transparency Mode directly.