Where to find the polling rate setting

The polling rate setting lives in Logitech G HUB, the software that comes with most Logitech gaming mice. You cannot change it from Windows settings or your mouse itself — you must use the app. Download G HUB from Logitech's website if you do not have it, then plug in your mouse and open the program.

Once G HUB is open, your mouse should appear as a device card. Click on it to open the mouse settings panel. The polling rate option is usually labeled "Report Rate" or "Polling Rate" and sits in the "Performance" or "Settings" tab, depending on your mouse model.

Key Takeaways

  • Polling rate changes only work through Logitech G HUB software, not through Windows or the mouse buttons.
  • Most Logitech gaming mice offer polling rates of 125 Hz, 250 Hz, 500 Hz, and 1000 Hz, though some older models have fewer options.
  • Higher polling rates use more USB bandwidth and battery power on wireless mice, so choose based on your actual use, not the highest number.
  • The setting saves to your mouse's onboard memory, so it stays active even if you unplug the mouse or restart your computer.

What polling rate options are available

Most current Logitech gaming mice let you choose from 125 Hz, 250 Hz, 500 Hz, or 1000 Hz. The number represents how many times per second the mouse reports its position to your computer. A higher number means more frequent updates and slightly lower latency, but the difference is only noticeable in competitive gaming.

Older Logitech mice may only offer 125 Hz and 500 Hz, or just 1000 Hz with no option to change. Check your specific model's manual or the G HUB interface to see which rates your mouse supports. If the polling rate option does not appear in G HUB, your mouse either does not support adjustable polling rates or requires a firmware update.

Steps to change the polling rate

Open Logitech G HUB and wait for it to detect your mouse. Click the mouse device card to enter its settings. Look for a tab labeled "Performance," "Settings," or "Advanced" — the exact name varies by model.

Find the "Report Rate" or "Polling Rate" dropdown menu. Click it and select your desired rate: 125 Hz, 250 Hz, 500 Hz, or 1000 Hz. The change takes effect immediately. You do not need to restart your computer or reconnect the mouse. Close G HUB when you are done; the setting remains saved in your mouse's memory.

When to use each polling rate

1000 Hz is the standard choice for competitive shooters and fast-paced games where every millisecond matters. It draws more power from your USB port and drains wireless mouse batteries faster, but the responsiveness gain is real in those contexts.

500 Hz is a middle ground. It provides noticeably lower latency than 125 Hz without the power cost of 1000 Hz. Most gamers find this sufficient for any game except esports titles.

250 Hz or 125 Hz work fine for everyday use, web browsing, and office work. They consume less power and reduce USB bandwidth load. On a wireless mouse, 125 Hz can extend battery life by several hours compared to 1000 Hz.

Troubleshooting when the setting will not change

If the polling rate option does not appear in G HUB, first check that your mouse is actually plugged in and detected. Look at the device card — it should show a green checkmark or "Connected" status. If it shows offline or disconnected, unplug the mouse, wait five seconds, and plug it back in.

If the option still does not appear, your mouse model may not support adjustable polling rates. Check the product page on Logitech's website to confirm. If it should support the feature, try uninstalling and reinstalling G HUB. Close the app completely, go to Control Panel > Programs > Uninstall a Program, find Logitech G HUB, and remove it. Then download the latest version from Logitech's website and install it fresh.

On wireless mice, make sure the mouse is charged or has fresh batteries. Some Logitech wireless mice disable certain settings when battery is critically low. If your mouse still will not let you change the polling rate after reinstalling G HUB, the mouse may need a firmware update. Open G HUB, go to the mouse settings, and look for an "Update" or "Firmware" button.

How polling rate affects your mouse and computer

A higher polling rate means your mouse sends more data to your computer every second. At 1000 Hz, your mouse reports 1000 times per second. This uses more USB bandwidth and, on wireless mice, drains the battery faster — typically by 10 to 20 percent depending on the model.

The latency difference between 125 Hz and 1000 Hz is about 8 milliseconds. In everyday work, you will not notice this. In competitive gaming, especially in shooters, some players report it feels smoother. The actual performance gain depends on your monitor's refresh rate, your graphics card, and your reaction time. If your monitor is 60 Hz, a polling rate above 250 Hz provides no practical benefit.

Frequently Asked Questions

Does polling rate affect gaming performance or FPS?

Polling rate does not change your frame rate or graphics performance. It only affects how often your mouse position updates on your computer. Higher polling rates can reduce input latency — the delay between moving your mouse and seeing the cursor move — but only by a few milliseconds. In competitive games, this can matter; in most other contexts, it does not.

Will changing polling rate damage my mouse or computer?

No. Changing polling rate is a normal setting that Logitech built into the mouse. It will not harm the hardware. The only trade-off is battery life on wireless mice at very high polling rates, but that is expected and reversible.

What polling rate should I use for my wireless Logitech mouse?

For gaming, 500 Hz or 1000 Hz depending on the game. For everyday use, 250 Hz or 125 Hz will save battery life without any noticeable difference in responsiveness. If battery life is your priority, use 125 Hz. If you play competitive games, use 1000 Hz and charge the mouse more often.

Can I set different polling rates for different games?

Yes. G HUB lets you create profiles tied to specific games. Set up a profile for your competitive game with 1000 Hz, and another profile for everyday use with 250 Hz. G HUB automatically switches profiles when you launch each game, so you do not have to manually change the setting.

What if my Logitech mouse is not showing up in G HUB?

Make sure the mouse is plugged in (or paired via wireless receiver) and powered on. Restart G HUB. If it still does not appear, unplug the mouse, restart your computer, and plug it back in. If the mouse still does not show up, try a different USB port. Some older mice may not be compatible with the latest version of G HUB.